Dr. Schutz Basic cleaner R is a soft alkaline intensive cleaner with strong dissolving power for the removal of building dirt as well as residues of wax layers, maintenance agents, self-shining dispersions and
Application Dr. Schutz Basic cleaner
Floors made of plastic (PVC, central heating, polyolefin), natural and artificial stone floors. Especially suitable for linoleum and rubber floors. Follow the maintenance advice for the floor in question.
Dr. Schutz Use basic cleaner for intensive cleaning
First remove the coarse, loose dirt by sweeping and vacuuming. Rinse basic cleaner R with water in the ratio 1: 5 to 1:10. In the case of particularly stubborn residues, Basic Cleaner R can be used undiluted and, in the case of low soiling, increase the dilution in accordance with the degree of soiling. Distribute the cleaning solution over the floor and leave to work for approx. 10 minutes. Never let dry. Floor with our Pad Holder and with our Green pad or Eenschijfsmachine with Green pad.
Remove contaminated water with a Dweil in domestic use. Rinse thoroughly with clean water until complete neutralization.
Dr. Schutz Basic cleaner use for basic cleaning
First remove the coarse, loose dirt by sweeping and vacuuming. Rinse basic cleaner R in household use in the ratio 1: 5 with water, use more concentrated in project applications or dilute to 1: 3 with water (depending on the resistance of the washings to be removed) and moisten the floor with clean water before treatment . The use is further according to the instructions for use in the previous section for the removal of building waste, although an exposure time of 15-20 minutes can be beneficial.
Note: Do not allow basic cleaner R to dry on the floor, therefore work in phases. For the basic cleaning of a sensitive floor (eg rubber, asphalt, terrazzo, flex panels), test for color and material resistance in an inconspicuous place. If necessary, dilute basic cleaner R more strongly and leave it to work several times. Wear rubber gloves during use and ensure good ventilation in the area to be cleaned. Do not moisten sensitive surfaces (eg wood, metal, painted surfaces) too much.
Consumption: 2-3 liters per 100m² (dilution 1: 5 to 1:10)
10-15 liters per 100m² (undiluted)