Maintenance oil Active can be used for the maintenance of all oiled floors. The oil gives the wood a beautiful warm glow and protects the wood against wear and scratches, thus extending the life span.
Maintenance oil Active can be applied manually or mechanically. Temperature of product, room and floor must be between 15 ° C-30 ° C. Always ensure good ventilation during the
application and curing.
Consumption: 40-50 m2 / l.
1 Clean the floor with WOCA Intensive cleaner, 125 ml on 5 l lukewarm water. Leave the floor for
dry for at least 8 hours. The floor must be completely dry.
2 Shake the bottle thoroughly.
3 Apply about 1 dl oil per 4 m2 with a pad (in combination with machine), our paint roller or a cotton cloth or use a single disc machine for large surfaces.
4 It is important that the Maintenance Oil Action is carefully rubbed into the wood. Continue rubbing until the wood appears saturated and the surface looks evenly.
5 Dry the floor with clean, dry cotton cloths before finishing the next
floor surface. The floor should not look wet and after the dry rub, no excess oil should remain on the surface.
6 Work step-by-step until the entire floor has been finished.
7 When a single disc machine is used, the floor will be dry after approx. 4 hours at 20 ° C and may be used with care. A manually rubbed floor may be put into operation after 24 hours. Do not expose the floor to water during the hardening time.
8 The floor must be treated with WOCA Natural Soap, which leaves a protective layer in the surface. Re-oil if necessary.
9 Clean the tool with WOCA Oil Thinner.
Risk of self-ignition: Considering the risk of spontaneous combustion, sanding dust and cloths containing oil
being soaked, soaking with water. After use, store and dispose in a well-closed container.
10 Always keep cleaning every week with Eco Multi Cleaner so that no dirt will get on the floor and therefore no damage will occur.
see technical data sheet above for more info.