Elastilon Sport 5 or 10mm (price per roll of 25m2)

Elastilon Sport 5 or 10mm (price per roll of 25m2) has the density of Elastilon Basic (30 kg / m³) or Elastilon Strong (50 kg / m³), ​​of which it only differs in thickness. It is available in 5 or 10 mm thickness depending on the wishes of the principal.
Article number:
14102
Availability:
In stock
Delivery time:
In Stock: Delivered Tomorrow from 06:30 (ordered today before 16.00 on working days)

€375,00 €299,00

Incl. tax
excl.btw: €247,11
Aantal


Elastilon Sport 5 or 10mm (price per roll of 25m2),

Elastilon Sport has the density of Elastilon Basic (30 kg / m³) or Elastilon Strong (50 kg / m³), ​​of which it only differs in thickness. It is available in 5 or 10 mm thickness depending on the wishes of the principal.
Compared to the traditional substructures for sports floors, which are very expensive, labor-intensive and very laborious, the great advantage of it manifests itself in the fact that a completely homogeneous suspension is achieved over the entire surface. That this suspension is perfectly adjustable to the wishes or requirements of the architect, principal or user, is the greatest advantage.
The ballet room of the University of Tilburg is a very nice example of this. Here the suspension is determined by neither the contractor nor the architect nor the owner, but by the head teacher of ballet.

• 5 or 10 mm
• price per roll of: 25 x 1 = 25 m2

• A perfect solution for an old problem (shrinking swell)
• Virtually emission-free (no pollution of the indoor climate)
• Due to 'dry bonding' no deformation of the parts (pulling a scheluw)
• Fast and clean way (time savings of 50 to 70%)
• No nails in the wood (which are visible after a renovation)
• High living and walking comfort (possible to whisper quiet)
• Depending on the floor type allowed in apartments and storey building (high impact sound reduction possible)
• Continuous elastic tensile stress from the parts to each other (no seaming)

PHYSICAL CHARACTERISTICS
PE foam
Quality: physically branched polyethylene foam
Density: 30 kg / m³
Tensile strength (along): 0.26 N / mm²
Expansion (along): 130%
Temperature range: -80 ° C / + 100 ° C
Heat conduction: 0.034 W / mK (at 0 ° C)
Moisture intake: <0.4% (after 7 days) <0.6% (after 28 days)
Permanent deformation @ 25% compression: 7% (22 hours, 23 ° C, after 24 hours of defecation)
Compression resistance @ 30% compression: 23 kPa

Resistant to fungi and insects
Free from CFCs
Kleefilm
Adhesive tape thickness: 0.15 mm
Adhesive weight: 80 g / m³
Adhesion force (N / 25 mm): 18 N
Shear resistance (25 mm x 25 mm): 500 g / 25 mm²

Temperature range
Application: + 10 ° C minimum
Operating temperature: -50 ° C / + 100 ° C
Short-term: + 120 ° C
Aging resistance: very good
Storage: 2 years @ 21 ° C, 50% relative humidity,
no direct sunlight or strong artificial light

0 stars based on 0 reviews Add your review


Tisasite.com


Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies (uw privacy blijft gewaarborgd) Manage cookies